Welcome to Elephantech pickups

Check out our news section to stay up to date with all the latest information regarding Elephantech's technologies and products as well as a broad range of other valuable and compelling content!

Latest posts

【Press Release】Shinkiba R&D Center begins operations
新木場R&Dセンター
Elephantech Inc. is pleased to announce that the company has completed the installation of equipment and construction work at its Shinkiba R&D Center. The facility has now started full operation.
【Press Release】Electrolytic Gold-plated Surface P-Flex® PI Samples Now Available
Electrolytic Gold-plated Surface P-Flex® PI Samples Now Available
Elephantech Inc. is pleased to announce that it has begun offering samples of P-Flex® PI with electrolytic gold plating surface treatment.
Elephantech cofounder and SVP Masaaki Sugimoto talk was featured on TechBlick’s Youtube channel!
masaaki-sugimoto
Elephantech cofounder and SVP Masaaki Sugimoto talk was featured on TechBlick's Youtube channel!
“Message from the CEO” has been updated.
Shimizu_Shinya
We are pleased to present a new message from Shinya Shimizu, Co-founder and CEO of Elephantech.
【Press Release】Announcing the Appointment of a New Director of the Additive Manufacturing Center From Mitsui Chemicals
miyao_hiroshi
Elephantech Inc. is pleased to announce the appointment of Mr. Hiroshi Miyao from Mitsui Chemicals Inc. as the new director of its Additive Manufacturing Center (“AMC”). The new appointment took effect on April 1, 2022.
【Press Release】Changes to our Outside Director and Outside Auditor
秋谷さん
Elephantech Inc. announces that it has changed its Outside Director and Outside Auditor as of March 30, 2022.
【Press Release】Joint Development with NICCA CHEMICAL of “Neochromato Process” Polyester Fabric Discharge Printing Technology for Zero-Waste Fashion
ファッション・テキスタイルロスゼロを目指す ポリエステル抜染技術『ネオクロマト加工』
Elephantech Inc. is pleased to announce the joint development with NICCA CHEMICAL CO., LTD. of the “Neochromato process” polyester fabric discharge printing technology with the aim of achieving zero-waste in fashion textile.
【Press Release】Elephantech Publishes Quantitative Evaluation of Life Cycle Assessment Based Reduction in CO2 Emission and Water Consumption
LCA評価に基づくCO2削減効果および 水消費量削減効果の定量評価
Elephantech Inc. is pleased to announce that the company has published an estimate on LCA-based reductions in CO2 emission, water consumption.
Elephantech cofounder and SVP Masaaki Sugimoto will be giving a talk about Printed, Hybrid, InMold, and 3D Electronics at Tech Blick’s March event
Elephantech cofounder and SVP Masaaki Sugimoto will be giving a talk about Printed, Hybrid, InMold, and 3D Electronics at Tech Blick’s March event
The official SNS account of the government of Japan just gave us an introduction!
エレファンテック 厚膜 P-Flex® PI
The official SNS account of the government of Japan just gave us an introduction!
“AMC(Additive Manufacturing Center)” Page is Updated!
Elephantech AMC(Additive Manufacturing Center)
We hope to accelerate the expansion of manufacturing possibilities to further expand the innovative additive manufacturing of inkjet technology and its social implementation.
【Press Release】Announcing the ISO9001 and ISO14001 Certification of the AMC Nagoya Large Mass-Production and Research Complex
Announcing the ISO9001 and ISO14001 Certification of the AMC Nagoya Large Mass-Production and Research Complex
Elephantech Inc. is pleased to announce that the AMC Nagoya large mass-production and research complex where Elephantech manufactures its P-Flex® Flex PCB has achieved ISO9001 and ISO14001 international standards certifications.
【Press Release】Announcing the Conclusion of a Distributorship Agreement with MARUBUN CORPORATION
Elephantech
Elephantech Inc. is pleased to announce that the company has concluded a distributorship agreement for its Flex PCB P-Flex® with the Marubun Corporation , an electronics distribution and solutions company.
Focus NEDO No.82 Special Edition NEDO Startup Future
NEDO
Our company was featured in "Focus NEDO" No.82 published by NEDO* as a noteworthy start-up company that continues to grow toward the future.
【Press Release】Elephantech’s P-Flex® Design Win for FUKUDA’s Air Leak Test System for Packaging Containers MSQ-2000 series
エレファンテック
Elephantech Inc. is pleased to announce that the company's Flex PCB P-Flex® has been successfully adopted for commercial production by Fukuda Co., Ltd. for its Air Leak Tester MSQ-2000.
【Press Release】Announcing the Appointment of Mr. Noda, Former Director of Toyota Fleet Leasing, as Full-time Audit & Supervisory Board Member
エレファンテック野田監査役
As of November 4, 2021, Elephantech is pleased to announce the appointment of Mr. Kazuhiko Noda as our Full-time Audit & Supervisory Board Member.
“List of Inks for Inkjet” Page is Updated!
エレファンテック エレファンテック フレキシブル基板 
Replaced “List of Silver Nanoparticle Inks for Inkjet” on the List of Inks for Inkjet” page.
【Press Release】Elephantech Announces U.S. Safety Standard Certification Granted by UL
エレファンテック 米国安全規格UL認証取得のお知らせ
Elephantech Inc. is pleased to announce that the company has been granted safety standards certification in flammability classification of V-0 for P-Flex® PI, a flex PCB produced in own plant from UL, an international third-party testing and certification institution.
【Press Release】Elephantech to Open New Shinkiba R&D Center
エレファンテック
Elephantech Inc. is pleased to announce that the company is opening a new R&D center in Shinkiba, Tokyo.
【Press Release】Announcing the Development and Evaluation of Inkjet Processes for Nickel Electrodes and Wiring
Niインクをバーコート塗布し無電解Cuめっきで積層したサンプルの断面
we'll continue to expand the variety of metal ink types the company handles to promote further the use and application of inkjet technologies in an ever-growing number of fields, including electronic component manufacturing processes.
【Press Release】Elephantech now Accepting Orders for our Thick Copper Trace P-Flex® Utilizing High-speed Electroless Plating
エレファンテック 厚膜 P-Flex® PI
Elephantech Inc. is pleased to announce that, as of September 15, the company has started accepting orders for its Thick Copper Trace P-Flex® utilizing high-speed electroless plating.
【Video】Elephantech CEO presentation
Elephantech CEO presentation
Shinya Shimizu, the CEO of Elephantech, explains Elephantech's mission, technology, and strategy.
The next generation Flexible PCB P-Flex®
エレファンテック Features of the Flexible Substrate P-Flex®
P-Flex®, a new idea and next generation flexible circuit that is compatible with mass customization is being used even in places where flexible circuits could not be used before.
Elephantech Site Map(Updated August 17,2021)
Related articles and content from Elephantech, grouped by category.
Flexible PCB P-Flex® is completely Tool-less!
フライングブローブテスタ(フライングチェッカー)
Flexible PCB P-Flex® is manufactured using the pure additive processing, in which metal nanoparticles are ink-jet printed only on the parts necessary to create the circuit, and the circuit is completed by high-speed electroless copper plating.
Elephantech’s company and product information and specifications (Updated August 6,2021)
Download the document set
You can download all of Elephantech's company and product information and specifications at once.
Making the world sustainable with new manufacturing technologies
Making the world sustainable with new manufacturing technologies
Elephantech Inc. manufactures P-Flex®, Flex PCB that can be produced with inkjet printing, which significantly reduces environmental burden following our mission of “Making the world sustainable with new manufacturing technologies”.
“List of Inks for Inkjet” Page is now available!
エレファンテック エレファンテック フレキシブル基板 
This "Inkjet Ink List" is a collection of information published on the Internet by each metal nanoparticle ink manufacturer.
【Press Release】Elephantech Announces Appointment of CTO and CFO as Members of the Board
Elephantech
Elephantech is pleased to announce that, as of May 2021, the company has appointed Mr. Junji Takeo CTO (Chief Technology Officer) and Mr. Gosuke Hashimoto CFO (Chief Financial Officer) as Board Directors.
【Press Release】Elephantech Announces Launch of P-Flex® PI Utilizing Laser Ablation and Inkjet Technologies
微細化
Elephantech Inc. is pleased to announce that the company has started production of P-Flex® PI utilizing laser ablation and inkjet technologies on May 13th.

Category