Latest posts
【Press Release】Announcing the Appointment of a New Director of the Additive Manufacturing Center From Mitsui Chemicals
Elephantech Inc. is pleased to announce the appointment of Mr. Hiroshi Miyao from Mitsui Chemicals Inc. as the new director of its Additive Manufacturing Center (“AMC”). The new appointment took effect on April 1, 2022.
【Press Release】Changes to our Outside Director and Outside Auditor
Elephantech Inc. announces that it has changed its Outside Director and Outside Auditor as of March 30, 2022.
【Press Release】Joint Development with NICCA CHEMICAL of “Neochromato Process” Polyester Fabric Discharge Printing Technology for Zero-Waste Fashion
Elephantech Inc. is pleased to announce the joint development with NICCA CHEMICAL CO., LTD. of the “Neochromato process” polyester fabric discharge printing technology with the aim of achieving zero-waste in fashion textile.
【Press Release】Elephantech Publishes Quantitative Evaluation of Life Cycle Assessment Based Reduction in CO2 Emission and Water Consumption
Elephantech Inc. is pleased to announce that the company has published an estimate on LCA-based reductions in CO2 emission, water consumption.
【Press Release】Announcing the ISO9001 and ISO14001 Certification of the AMC Nagoya Large Mass-Production and Research Complex
Elephantech Inc. is pleased to announce that the AMC Nagoya large mass-production and research complex where Elephantech manufactures its P-Flex® Flex PCB has achieved ISO9001 and ISO14001 international standards certifications.
【Press Release】Announcing the Conclusion of a Distributorship Agreement with MARUBUN CORPORATION
Elephantech Inc. is pleased to announce that the company has concluded a distributorship agreement for its Flex PCB P-Flex® with the Marubun Corporation , an electronics distribution and solutions company.
【Press Release】Elephantech’s P-Flex® Design Win for FUKUDA’s Air Leak Test System for Packaging Containers MSQ-2000 series
Elephantech Inc. is pleased to announce that the company's Flex PCB P-Flex® has been successfully adopted for commercial production by Fukuda Co., Ltd. for its Air Leak Tester MSQ-2000.
【Press Release】Announcing the Appointment of Mr. Noda, Former Director of Toyota Fleet Leasing, as Full-time Audit & Supervisory Board Member
As of November 4, 2021, Elephantech is pleased to announce the appointment of Mr. Kazuhiko Noda as our Full-time Audit & Supervisory Board Member.
【Press Release】Elephantech Announces U.S. Safety Standard Certification Granted by UL
Elephantech Inc. is pleased to announce that the company has been granted safety standards certification in flammability classification of V-0 for P-Flex® PI, a flex PCB produced in own plant from UL, an international third-party testing and certification institution.
【Press Release】Elephantech to Open New Shinkiba R&D Center
Elephantech Inc. is pleased to announce that the company is opening a new R&D center in Shinkiba, Tokyo.
【Press Release】Announcing the Development and Evaluation of Inkjet Processes for Nickel Electrodes and Wiring
we'll continue to expand the variety of metal ink types the company handles to promote further the use and application of inkjet technologies in an ever-growing number of fields, including electronic component manufacturing processes.
【Press Release】Elephantech now Accepting Orders for our Thick Copper Trace P-Flex® Utilizing High-speed Electroless Plating
Elephantech Inc. is pleased to announce that, as of September 15, the company has started accepting orders for its Thick Copper Trace P-Flex® utilizing high-speed electroless plating.
【Press Release】Elephantech Announces Appointment of CTO and CFO as Members of the Board
Elephantech is pleased to announce that, as of May 2021, the company has appointed Mr. Junji Takeo CTO (Chief Technology Officer) and Mr. Gosuke Hashimoto CFO (Chief Financial Officer) as Board Directors.
【Press Release】Elephantech Announces Launch of P-Flex® PI Utilizing Laser Ablation and Inkjet Technologies
Elephantech Inc. is pleased to announce that the company has started production of P-Flex® PI utilizing laser ablation and inkjet technologies on May 13th.
【Press Release】Elephantech Starts Operations at its Large Mass-Production and Research Complex
Elephantech is pleased to announce that, as of January 2021, the company has started operations at its large mass-production and research complex for P-Flex® ("AMC Nagoya").
【Press Release】P-Flex® Design Win for EIZO Corporation’s FlexScan® EV3895 Ultrawide, Curved Monitor
Elephantech's P-Flex® has been adopted by EIZO Corporation for the mass production of its FlexScan® EV3895 monitor and is used in its control switches.
【Press Release】Elephantech to welcome staff on loan transfer from Sumitomo Corporation
Elephantech is pleased to announce that, as of October 2020, the company is welcoming a member of staff from Sumitomo Corporation on a loan transfer scheme.
【Press Release】Nisshinbo Mechatronics and Elephantech Agree to Develop Molded Parts for ADAS Vehicles Using IMPC® Technology
Nisshinbo Mechatronics and Elephantech Agree to Develop Molded Parts for ADAS Vehicles Using IMPC® Technology
【Press Release】Announcing the Appointment of a New Director of the Additive Manufacturing Center From Mitsui Chemicals
Elephantech is pleased to announce that, as of June 1, 2020, the company has welcomed Mr Kawamoto on a temporary transfer from Mitsui Chemicals as the new director of its Additive Manufacturing Center.
【Press Release】Announcing Launch of Ink Discharge Evaluation Service
Elephantech has started an ink discharge evaluation service for inkjet printing inks.The service provides a rapid evaluation of ink performance for inkjet printing.
【Press Release】JPY 800 Million Commitment Line Agreement with Shoko Chukin Bank
Elephantech has secured a Commitment Line for an aggregate of 800 million JPY from the Ueno Branch of the Shoko Chukin Bank.
【Press Release】Changes to the P-Flex® PET soldermask color
As of February 2020, we have changed the color of the P-Flex® PET standard soldermask from green to transparent.
【Press Release】Elephantech to welcome staff on loan transfer from Toyota
We hereby announce that, as of January 2020, we will be taking in 1 member of staff from Toyota Motor Corporation on a staff loan scheme and will be launching a new business project concerning automotive-grade IMPC.
【Press Release】Changes to our Outside Directors and Outside Auditors
Elephantech Inc. (CEO Shinya Shimizu) hereby announces the following changes made to its Outside Directors and Outside Auditors as of December 25, 2019.
【Press Release】Elephantech completes capital reduction procedures
【Press Release】Elephantech completes capital reduction procedures
【Press Release】Opening of a satellite office in the Tohoku region
【Press Release】Opening of a satellite office in the Tohoku region
【Press Release】Elephantech raises 1.8 billion JPY, establishing large mass-production and research complex
【Press Release】Elephantech raises 1.8 billion JPY, establishing large mass-production and research complex
【Press Release】Mitsui Chemicals and Elephantech Form Strategic Partnership
【Press Release】Setting up inkjet-based mass production for flexible PCBs at Mitsui Chemicals’ Nagoya Works
【Press Release】Epson and Startup Elephantech Forge Capital and Business Ties
【Press Release】Epson and Startup Elephantech Forge Capital and Business Ties
【Press Release】We have changed the color of theFlex PCB P-Flex® legend to white
【Press Release】We have changed the color of the single-sided flex PCB P-Flex® legend to white
